Product: HCPL-2200-300E

HCPL-2200-300E

IC OPTOISO 3.75KV TRI-STATE SMD8 GW

Manufacturer : BROADCOM

RoHS Status : RoHS Compliant

The HCPL-2200 optocoupler is an optically coupled logic gate that combines a GaAsP LED and an integrated high gain photodetector. The detector has a three state output stage and has a detector threshold with hysteresis. The three state output eliminates the need for a pullup resistor and allows for direct drive of data busses. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter.

The Electrical Switching Characteristics of the HCPL-2200 are guaranteed over the temperature range of 0 degrees C to 85 degrees C and a VCC range of 4.5 volts to 20 volts. Low IF and wide VCC range allow compatibility with TTL, LSTTL, and CMOS logic and result in lower power consumption compared to other high speed optocouplers. Logic signals are transmitted with a typical propagation delay of 160 nsec.

It is useful for isolating high speed logic interfaces, buffering of input and output lines, and implementing isolated line receivers in high noise environments.

Product Attributes

Low Input Current Logic Gate Optocouplers

Specification Value
Lifecycle Active
Distributor Inventory Yes
CMR (min.) (V/µs) 1000
IEC Maximum Working Insulation Voltage Viorm (VPEAK) 630
IF Min. (mA) 1.6 mA
Package 300mil DIP
Product Type 5 MBd Logic Gate
Prop Delay (tPHL) Max 300
Prop Delay (tPLH) Max 300
RoHS6 Compliant Pb & Pb-free options available
UL Insulation Rating Viso (VRMS) 3750
Vcm (V) 50
VDD2 (V) 5

 

Related Products